On this page, cookies are needed if you want to use the full range of the page. Please activate cookies and refresh that page. After refresh a cookie management dialogs will be available.

The cookie settings on this website are set to 'allow only stricty necessary' to give you the very best experience. If you continue without changing these settings, you consent to this - but if you want, you can change your settings at any time at the bottom of this page. Our cookie policy


LTC 9488/00 Indoor Housing

Commercial Type No.: LTC9488/00
Product No.: 4.998.137.633

  • Overview
    Model No. Preinstalled Heater or Heater/Blower , Volt / Power V/W , Camera Models with these Voltage Ratings
    Indoor Units
    LTC 9488/00 - , - , 24 VAC 115 VAC 230 VAC
    Maximum Camera and Lens:
    LTC 9488/00 (WxHxL) 71 x 71 x 356 mm (2.8 x 2.8 x 14.0 in)
    Cable Entry
    Three (3) liquid tight rear fittings, two (2) of which accept cable diameters from 4.3 mm to 11.9 mm (0.17 in to 0.47 in) and one (1) that accepts cable diameters from 4.6 mm to 7.9 mm (0.18 in to 0.31 in).Two (2) bottom feed-through liquid tight fittings accept cable diameters from 4.6 mm to 7.9 mm (0.18 in to 0.31 in).
    Window 3 mm (0.12 in) thick UV-stabilized polycarbonate.
    Housing Mounting Four (4) available 1/4-20 tapped holes. Only one set of two is required for mounting.
    Camera Mounting Removable camera bracket. Mounted with two screws.
    Construction Aluminum cover, aluminum base, aluminum mounting foot, polycarbonate faceplate, glass reinforced polycarbonate end caps, neoprene gasket, ethylene propylene seal, and all stainless steel hardware.
    Finish Dark mushroom
    Dimensions See drawings
    Weight (approx.) 3.2 kg (7 lb)
    Salt Atmosphere MIL-STD-810E, Method 509, Procedure 1.
    Enclosure Protection IP65, Designed to meet NEMA-4
    Electromagnetic Compatibility
    Safety UL, cUL, CE
    Sunshield Provides protection from the direct rays of sun and promotes cooling to reduce internal housing temperatures.
    LTC 9088/01 For LTC 9488 Series housings
    LTC9080/00 Tamper Resistant Kit Includes ten 10 screws and insertion tool to permit tamper resistance for five (5) housings.
    LTC9215/00 Mount Feed-through mount attached to the foot of housing for HSG 9483, LTC 9480 Series & LTC 9488 Series housings.
    LTC 9215/00S Mount Feed-through mount attached to the foot of housing for HSG 9483, LTC 9480 Series & LTC 9488 housings.
    LTC9219/01 J-mount Feed-through J-mount allows housing to be mounted from ceiling.
    Suggested Applications:
    LTC 9488/00
    Camera Model Lens
    LTC 0335 Fixed/Vari/ Zoom
    LTC 0355 Fixed/Vari/ Zoom
    LTC 0435 Fixed/Vari/ Zoom
    LTC 0455 Fixed/Vari Zoom
  • Documents (2)