On this page, cookies are needed if you want to use the full range of the page. Please activate cookies and refresh that page. After refresh a cookie management dialogs will be available.

The cookie settings on this website are set to 'allow only stricty necessary' to give you the very best experience. If you continue without changing these settings, you consent to this - but if you want, you can change your settings at any time at the bottom of this page. Our cookie policy


UHI‑OG(S)‑0 Indoor Camera Housing

UHI‑OG(S)‑0 Indoor Camera Housing
  • Protects camera/lens combinations up to 317 mm (12.48 in) length
  • Hinged side opening for easy installation and camera setup
  • Strong aluminum construction
  • Cable routing through base or rear of housing
  • Tamper-resistant
  • Self cleaning glass
  • Overview
    Rear fitting 1 x, cable diameter 4.0 to 7.0 mm (0.16 to 0.28 in)
    Rear fittings 2 x, cable diameter 6.5 to 10.5 mm (0.26 to 0.42 in)
    Bottom feeds 2 x, cable diameter 4.0 to 7.0 mm (0.16 to 0.28 in)
    Window 3 mm (0.12 in) glass
    Locking clasps Tamper-resistant screws provided
    Camera power ratings 24/120/230 VAC, 50/60 Hz, 6.3 A
    Camera mounting Removable camera/lens tray, mounted with two screws
    Max camera + lens size (H x W x L) 81 x 89 x 317 mm (3.19 x 3.50 x 12.48 in)
    Construction Aluminum casing, neoprene gaskets, all stainless steel hardware
    Dimensions See drawings
    Weight 2.3 kg (5.1 lb)
    Mounting 2 x pair of tapped holes
       thread 1/4-20
       inner pair 50.8 mm (2.0 in) center spread
       outer pair 73.7 mm (2.9 in) center spread
    Color Gray
    Operating temperature -40 °C to +50 °C (-40 °F to +122 °F)
    Enclosure protection IP66, NEMA-4X


  • Certificates (1)
  • Documents (3)

Product variants

UHI‑OG‑0 Indoor Housing

Commercial Type No.: UHI-OG-0
Product No.: F.01U.026.741

UHI‑OGS‑0 Indoor Housing with Sunshield

Commercial Type No.: UHI-OGS-0
Product No.: F.01U.028.282



LTC 9215/00S Mount

Wall mount for camera housing, cable feed-through, 18 cm (7 in.)

Commercial Type No.: LTC 9215/00S
Product No.: F.01U.503.621


LTC 9215/00 Mount

Wall mount for camera housing, cable feed-through, 30 cm (12 in.)

Commercial Type No.: LTC 9215/00
Product No.: 4.998.137.651


HAC-TAMP01 Tamper Switch

Tamper switch kit for HSG and UHI/UHO series enclosures

Commercial Type No.: HAC-TAMP01
Product No.: F.01U.005.044


LTC 9219/01 Feed-through J-Mount

J-mount for camera housing, 40 cm (15-inch), 9 kg (20 lb) max load

Commercial Type No.: LTC 9219/01
Product No.: F.01U.503.623